FS: 50 cm, Raleigh Mixte SS, with custom wood fenders.

Here is my latest bike re-build, wanted to see if anyone here was interested. I could also include a custom built wooden crate for the back. Hardwood, made from scratch, no pic yet.

Please let em know if you can't see the pics below, I am using picassa and not sure how well the code works.Thanks


Rebuilt, updated Single Speed Mixte, New Kevlar tires, Chain, Seat, Seatpost, Brake Levers, Grips

I removed the gaudy stickers and re-painted the lettering. Custom adapted cargo rack. The fenders are custom built, by me, laminated exotic hardwood fenders.

Pick up just off of the blue line Oak Park stop, or just off of the 290 express way. Cash Only, $220








Views: 657

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ryan L on October 5, 2009 at 6:02am
Curious what you used as a spacer for the rear rack assembly? Looks like a wood block with the center carved out for bolt access and maybe part of the fender? I have a similar issue getting the same rack onto my '68 Racer. I'm gonna have to make my own mounting bracket and this helps me think about what I'm gonna do.

Nice Build BTW.
Permalink Reply by on2wheels on October 5, 2009 at 6:09am
Yeah it is simply a block of walnut. The cutout was or the nut and a flange that the "brake" bridge had. There were three holes in the bridge to begin with. Just make sure you use a hard wood and long enough screws that have a good bite to them and it will be plenty stable.

Let me know if you need any help fabricating this.


Ryan L said:
Curious what you used as a spacer for the rear rack assembly? Looks like a wood block with the center carved out for bolt access and maybe part of the fender? I have a similar issue getting the same rack onto my '68 Racer. I'm gonna have to make my own mounting bracket and this helps me think about what I'm gonna do.

Nice Build BTW.
Permalink Reply by dan brown on October 5, 2009 at 7:03am
very sweet.

what size if the frame btw ?
Permalink Reply by on2wheels on October 5, 2009 at 7:50am
I knew I forgot something. Will measure and post when I get home.

daniel brown said:
very sweet.

what size if the frame btw ?
Permalink Reply by Arrak Thumrs on October 5, 2009 at 8:45am
Those pletscher racks are real practical. I took a long bolt, cut off the head and threaded both ends. Makes for a simple and very low cost solution:

Permalink Reply by Duppie on October 5, 2009 at 8:53am
Maybe you can also post the asking price? Or did I miss it....

on2wheels said:
I knew I forgot something. Will measure and post when I get home.

daniel brown said:
very sweet.

what size if the frame btw ?
Permalink Reply by on2wheels on October 6, 2009 at 3:12am
The size is 50cm and the asking price is $220
Permalink Reply by Homebuilt on October 6, 2009 at 10:28am
Very nice On2! It looks like your fender attachments have gotten a little more solid since your first ones, too. Alas, we're not in the market for another bike right now.
Permalink Reply by on2wheels on October 6, 2009 at 10:31am
Thanks For noticing. I wanted to replicate honjo's system for the stays from scratch. It worked pretty well.


Homebuilt said:
Very nice On2! It looks like your fender attachments have gotten a little more solid since your first ones, too. Alas, we're not in the market for another bike right now.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service