Dings, Scratches, Marks, Chips, Worn Spots. - Bicycle Frame Protection ?

http://www.allmountainstyle.com/blogs/news/9697008-ams-honeycomb-fr...


I'm noticing that when I lock up, my frame is starting to get kinda scratched up at the points of contact. I don't want my baby to look all messed up. Does anyone have any recommendations for this problem. I've seen some things online but want to know what you think. Thanxs



Support your CL community. Become a contributor. Post a discussion. Reply. Lurking is just no fun. Come along for the ride!

Views: 1335

Attachments:

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Tom A.K. on January 24, 2015 at 1:10pm
Permalink Reply by Doug Haynes on January 26, 2015 at 3:16am

Never use WD-40 for anything other than displacing water or as a cleaner.

It is not a lubricant and it is not a sufficient coating to be used as a corrosion preventative.  

Permalink Reply by David P. on January 26, 2015 at 4:30am

Tom A.K., you are so....serious!

Dug, re: protectors, that's not always the case if you apply the right material well. When I stripped down my MB-4 frameset and removed the electrical tape I had put on the top tube in 1994 I had sparkly, brand-new paint!

Superficial rust on chips (e.g. from locking up) are bound to happen on a bike with a painted finish that gets used hard. It's not that big a deal, but a bit of sandpaper and paint or a dab of rust converter will address it just fine.

Framesaver for the inside and powdercoat for the outside will together do a great job of protecting your frame in heavy use. My daily driver is PCed and got a Framesaver coat for the inside when I first built it up in 2009 and while the finish is scratched, etc. as you might expect from almost 6 years of daily use, the frame itself is in perfect shape and nothing has penetrated the coating.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service