Back pain and biking -- ideas and solutions sought!

Has anyone tried using a recumbent bike to help alleviate back pain experienced both during and after a bike ride?  Would love to hear pros and cons from anyone who has tried both.  

Views: 908

▶ Reply to This

Replies to This Discussion

Permalink Reply by Doug Haynes on October 1, 2013 at 7:29am

Before moving to a recumbent I suggest having your bike fit properly checked by a qualified shop.

Not just every shop and/or sales person is going to be able to fit you properly; make sure they talk to you about the amount and type of riding that you do as well as get very specific details on your discomfort.

Permalink Reply by XndeX on October 1, 2013 at 9:33am

I had a similar experience with my ride.
I thought getting maximum extension was the best way to get the most power!
Was I ever wrong! Went to my LBS and told them about the same discomfort and pain.
Pretty much the same as you are describing. They had me get on my bike and pedal backwards.
They nailed what was wrong in less than 5 minutes.
I had my seat adjusted to high. So it was lowered all of 1".
Seat was also too narrow. Had to wait for a replacement since they were out of stock.
Those 2 items alone were what gave me back and butt pain.
Granted this is not a recumbent bike. So YMMV.

Permalink Reply by Michelle on October 1, 2013 at 9:48am
Does anyone have recommendations for shops that do great fittings? I want to do one. My bikes comfy already but I wonder if there's anything that could be better.
Permalink Reply by Kevin C Dormant on October 1, 2013 at 1:37pm

I think the first step for the OP is to get a good fit and rule out any medical or biomechanical causes for her discomfort on an upright bike. Once that analysis is completed, and before she tries a recumbent, she needs to ask herself how she'll look with a beard. 

Permalink Reply by Andy J on October 1, 2013 at 2:31pm
+1 for beard respect



Kevin C said:

I think the first step for the OP is to get a good fit and rule out any medical or biomechanical causes for her discomfort on an upright bike. Once that analysis is completed, and before she tries a recumbent, she needs to ask herself how she'll look with a beard. 

Permalink Reply by David P. on October 1, 2013 at 2:49pm

Echo,

You might could give butterfly/trekking bars a try - three or four hand positions, you can swap all your controls over and at most you might also need a longer stem.

echo said:

I agree with what everyone else has said -- make sure that you are properly fit to your bike. I am curious, though, where are you experiencing pain? That could also be helpful in determining what is wrong (although, sometimes it's not that straightforward). 

Also, how long have you had the bike? How many different set ups have you tried? There are SO MANY things you can try first. Your back pain could be caused by any combination of poor fit or needing a different product size/shape: saddle, stem height, handlebar shape, handlebar width, pedals, etc.

Last year, I had upper back and shoulder pain. I never felt comfortable with a road set up. I felt like I was reaching too far and that my handlebars were too wide this made me...I dunno how to explain, but I was kind of popping out my shoulder. Too much pressure on my back. I rode like that all summer long and ended up having to go physical therapy for it! Yikes! 

So, this year, I had my road bike converted to a hybrid--flat bars and grip shifters. It's been pretty good so far, but I still get the pain sometimes (just to a smaller degree). I'm about to change from grip shifters to something like my mountain bike has. There will be paddles for shifting again, and the grips are going to have a little pad to rest my palm on. Still flat bars. 

I don't think I'll ever quite get it right on my road (hybrid?) bike. Because of the frame size and/or shape all of the handlebars that can fit are just too wide and short.  But...I miss having multiple hand positions. So, I'm saving up now to get something like a Salsa touring bike.

Permalink Reply by grayn8 on October 1, 2013 at 3:40pm
I don't know about recumbent bikes, but I love my butterfly bars. I found them with help in the bins at working bikes. My profile pic is of them. I went to them because I was having a cervical slip disc issue. I was told by PT to do a bunch of stuff, but the three most drastic improvements came from the bars, wearing gloves, and switching out the back pack for panniers. I have not been professionally fitted, but I definitely would agree that fit is extremely important. As always, the caveat, this worked for me ymmv.
Permalink Reply by Wendi Kromash on October 1, 2013 at 5:19pm

Thanks!

Permalink Reply by Wendi Kromash on October 1, 2013 at 5:19pm

Great ideas from everyone -- thanks so much!



echo said:

YES! I've been looking for them--they sound like exactly what I need.

Do you know where can I find them? I'd love to try some in person!

David P. said:

Echo,

You might could give butterfly/trekking bars a try - three or four hand positions, you can swap all your controls over and at most you might also need a longer stem.

echo said:

I agree with what everyone else has said -- make sure that you are properly fit to your bike. I am curious, though, where are you experiencing pain? That could also be helpful in determining what is wrong (although, sometimes it's not that straightforward). 

Also, how long have you had the bike? How many different set ups have you tried? There are SO MANY things you can try first. Your back pain could be caused by any combination of poor fit or needing a different product size/shape: saddle, stem height, handlebar shape, handlebar width, pedals, etc.

Last year, I had upper back and shoulder pain. I never felt comfortable with a road set up. I felt like I was reaching too far and that my handlebars were too wide this made me...I dunno how to explain, but I was kind of popping out my shoulder. Too much pressure on my back. I rode like that all summer long and ended up having to go physical therapy for it! Yikes! 

So, this year, I had my road bike converted to a hybrid--flat bars and grip shifters. It's been pretty good so far, but I still get the pain sometimes (just to a smaller degree). I'm about to change from grip shifters to something like my mountain bike has. There will be paddles for shifting again, and the grips are going to have a little pad to rest my palm on. Still flat bars. 

I don't think I'll ever quite get it right on my road (hybrid?) bike. Because of the frame size and/or shape all of the handlebars that can fit are just too wide and short.  But...I miss having multiple hand positions. So, I'm saving up now to get something like a Salsa touring bike.

Permalink Reply by Skip Montanaro 0mi on October 1, 2013 at 10:54pm
Ugh. Good riddance, I say. Maybe mustache handlebars would be a suitable alternative, and should be readily available. Google for that term. Lots of choices.
Permalink Reply by Lisa Curcio on October 2, 2013 at 2:29am

Echo, have you tried Comrade?

Permalink Reply by Doug Haynes on October 2, 2013 at 2:43am

Any shop can order trekking bars for you.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service