Road Construction Report(s)

9/20/12 Damen from Division to Jackson is "Rough Grooved Surface." Plan accordingly.

Views: 11234

▶ Reply to This

Replies to This Discussion

Permalink Reply by JeffB on September 21, 2012 at 4:44am

Long over due for surface improvements.  There are some rough spots.  Hopefully the area between North and Division will be improved soon too.

Permalink Reply by Anne Alt on September 21, 2012 at 4:54am

Many scattered blocks in Beverly and Morgan Park have been ground down for repaving in recent weeks.  In the last week, the paving crews have been doing their thing, so there's some new pavement to ride on.  :)

I hope that section of Damen is paved soon.

Permalink Reply by Kevin C Dormant on October 2, 2012 at 5:04am

As of Tuesday morning, October 2nd, Damen is now a smooth ribbon of new blacktop. I didn't ride it all the way south to Jackson, but assume the entire length was completed. Pavement is mostly striped as well.

Permalink Reply by Anne Alt on October 2, 2012 at 5:29am

We now have new pavement on Longwood Dr. from 103rd to 105th Pl (desperately needed), Prospect (same cross streets), and Hoyne from 97th to 99th.  If only the adjacent section of 97th St. (Leavitt to Hoyne), which currently resembles Swiss cheese more than pavement, would have gotten done. *sigh*

Permalink Reply by JeffB on October 4, 2012 at 2:30pm

Its Clark St's turn.  Diversey to Roscoe is torn up

Permalink Reply by Melissa on October 4, 2012 at 4:06pm

There's a stretch of Elston that is also mildly terrifying right now. 

Permalink Reply by Martin Hazard on October 4, 2012 at 6:05pm

Canal from Roosevelt to Harrison I think. Rough grooved, and some unmarked mini rebar sticking out here and there. 

Now there is Clyborn from  Division to North Av. Roughest "grooved surface" I think I have ever ridden. I flatted with a 3/4 in. slash in the sidewall. Finished my ride with a dollar bill in the tire,  and did not continue on on Clyborn.

Permalink Reply by Anne Alt on October 5, 2012 at 1:16am

Harrison St. bridge over the river has been under construction for many months now, with no end in sight.  This means that traffic is narrowed down to 1 lane in each direction over the bridge.  Unless you ride fast, riding on the street here is a guaranteed hassle.  Sidewalks are narrow and punctuated by signposts, so it's not a great alternative, unless you want to join the peds and walk it.

With Van Buren and Jackson bridges closed until December due to Wacker Dr. reconstruction, this means we have a gap between rideable routes over the river from Adams/Monroe to Roosevelt - if you consider Roosevelt a "rideable" route.  If not, the gap extends to the 18th St. bridge.

Permalink Reply by Michelle S on October 5, 2012 at 1:43am

I'm totally loving the construction cones on the Dearborn St bridge that are currently creating a temporary protected bike lane, until the real one goes in.

Permalink Reply by Kevin C Dormant on October 5, 2012 at 2:30am

10/4/12 A couple blocks of Hubbard east of Racine is rough grooved surface.

Permalink Reply by Anne Alt on October 5, 2012 at 3:07am

+1  I've had a chance to enjoy that one a few times in recent weeks.

Michelle Stenzel said:

I'm totally loving the construction cones on the Dearborn St bridge that are currently creating a temporary protected bike lane, until the real one goes in.

Permalink Reply by Anne Alt on October 5, 2012 at 3:08am

OMG!!!  They're FINALLY repaving that?  Yeah!!!!

Kevin C said:

10/4/12 A couple blocks of Hubbard east of Racine is rough grooved surface.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service