Wanted: a bike shop/mechanic to work on Shimano Nexus internal gear hub

I'm looking for recommendations for a good shop or mechanic with experience repairing and rebuilding Shimano Nexus 7-speed hubs. I have two of these hubs that now have thousands of miles on them and are starting to show it. Any recommendations? 

Views: 517

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jerry on February 10, 2015 at 5:21am

Ditto.  Looking for an experienced mechanic who can work on my Nexus 8.  Thanks!

Permalink Reply by Mike Schwab on February 10, 2015 at 6:42am

A search for hub found http://www.chicagobikeshops.info/shopDetails.php?id=22 offers 3 speed hub rebuilds.

Permalink Reply by ambimb on February 10, 2015 at 7:03am

Thanks. A 7-8 speed hub is pretty different from a 3-speed, but I will check Rudy's out. 

Mike Schwab said:

A search for hub found http://www.chicagobikeshops.info/shopDetails.php?id=22 offers 3 speed hub rebuilds.

Permalink Reply by Kevin C Dormant on February 10, 2015 at 7:16am

Owen @ Blue City Cycles or Notorious DUG at a bike shop near you are the IGH wizards in the Chicagoland area.

Permalink Reply by PK RPR on February 10, 2015 at 7:30am

Dan at McDonald's Bike Center did a great job with my N8

Permalink Reply by ambimb on February 10, 2015 at 9:09am

Where by "a bike shop near you" you mean...? What? 

Kevin C said:

Owen @ Blue City Cycles or Notorious DUG at a bike shop near you are the IGH wizards in the Chicagoland area.

Permalink Reply by ambimb on February 10, 2015 at 9:10am

Yes, Dan is the bomb. Is he still there? I used to commute to the Bike Center every day so he rebuilt one of my hubs a couple of years ago. Very impressive. Maybe I'll just trek back down there...

PK RPR said:

Dan at McDonald's Bike Center did a great job with my N8

Permalink Reply by Allen Wrench on February 11, 2015 at 5:18pm

Try Jon Lind (JCLind) or Rapid Transit who have both fixed Nexus 8s for us. Different but same as the 7. In Seattle, Aarons ( http://rideyourbike.com/internalgears.shtml ) is often mentioned, no experience with them.  Or look at Hubstripping and diy? You can get new internals for some of these still. 

Permalink Reply by PK RPR on February 11, 2015 at 9:42pm
Dan is still there...




ambimb said:

Yes, Dan is the bomb. Is he still there? I used to commute to the Bike Center every day so he rebuilt one of my hubs a couple of years ago. Very impressive. Maybe I'll just trek back down there...

PK RPR said:

Dan at McDonald's Bike Center did a great job with my N8

Permalink Reply by Christopher Williams on February 12, 2015 at 8:38am

Hi, if you bring it to Rapid Transit at 1344 South Halsted we are experienced with Nexus 7 and 8s, and we have the Shimano oil bath setup and waiting for weary hubs to revitalize in.  We would be more than happy to help, and we guarantee our work.  -Chris Williams

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service