Fixie Riders - what gear are you running?

While I like my Trek fixed gear conversion, I think the gearing is a bit high, especially for running studded tires. To all you fixie riders out there, what sizes are you running for chainring and cog?

Views: 444

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mike Zumwalt on March 7, 2014 at 7:38am

I have 48-16 which until I got a smaller hub on the rear I rarely rode fixed.

My top end is lower now but I can successfully stop! I also ride with brakes just in case.

I've seen the gear changing taken off and just using different size chains on the remaining cogs to adjust speed 

Not sure how that works out?

Permalink Reply by Andrew Bedno on March 7, 2014 at 7:40am

44:17 (1:2.58) and way happy with it for years.

Permalink Reply by T.K. 3.5 mi on March 7, 2014 at 7:53am

47:16

700x25 tires

170mm cranks

Permalink Reply by Skip Montanaro 0mi on March 7, 2014 at 7:55am

Thanks. I don't skid, but the equivalent gear combinations are nice.


John W. said:

Also, http://www.surplace.fr/ffgc/ 

Use it.  It's awesome.

Permalink Reply by Skip Montanaro 0mi on March 7, 2014 at 8:05am

I'm currently using 47:17 (if memory serves). I'm older than most/all of you though, and with the studded 700x30 tires, that's a bit high for my aging knees. If I drop to 46:18 I'll probably be okay, and be able to use my current chain. Alas, that crank in my avatar is 151BCD, so it takes me a bit longer to dredge up a new chainring. :-)

Permalink Reply by Alex on March 7, 2014 at 8:30am

I used to ride a 52/13 but me was a silly lad. I like 48-16 now.

Permalink Reply by Rick Schukat (6.3mi) on March 7, 2014 at 10:41am

44-18 works for my path riding.

Permalink Reply by Jose Zayas on March 7, 2014 at 7:57pm

Currently 48:17 from a 48:15 last year, and I can feel the difference in those 2 extra t's in the cog. I think for Chicago, and my knees, it's not bad. Although my preferred commuter ratio is 44:17 for everyday fun, or if hills and/or strong wind are present.

Permalink Reply by mike w. on March 8, 2014 at 2:42am

44X17

Permalink Reply by Mike Fiasco on March 8, 2014 at 3:14am

Hey you wimps... I ride 14 in the rear.

... but I have 36 in front.

All of which gives me the same gear ratio as a 44x17.

Permalink Reply by Skip Montanaro 0mi on March 8, 2014 at 3:23am

Looks like you're carrying a little extra weight in that frame that most folks. <wink>

Mike Fiasco said:

Hey you wimps... I ride 14 in the rear. ... but I have 36 in front.

All of which gives me the same gear ratio as a 44x17.

Permalink Reply by Skip Montanaro 0mi on March 8, 2014 at 3:25am

Thanks for the replies folks. I've got to start hunting down a new chainring and a new cog. Of course, when I built my Trek, I used a 151BCD crank up front, and a Miche carrier+cog setup in back. Neither option is as available as other common options.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service