Plastic welder?

OK, I know this is a long-shot, but do any of you DIYers happen to own a plastic welder? This is on-topic, because it's for my bike trailer. Appropriate compensation would be supplied (materials & beer?)

▶ Reply to This

Replies to This Discussion

Permalink Reply by Matt M. 18.5KM on March 9, 2009 at 10:01am

Nope. Plastic welder gear costs $$$$. Go for epoxy and pop rivets, cheif. The hardware store might put in your rivets for you if you know the right shop. They do it in Skokie at the Ace.

Only other way to bond pieces together at home is fiberglass. Smooth it out with Bondo or body filler. Remember to install solid plastic angle pieces at the corners or some kind of similar bracing - like aluminum 90 degree angles.

▶ Reply

Permalink Reply by Chuck a Muck on March 9, 2009 at 10:15am

I found this for 169.00
http://www.arizonatools.com/tools/plastic-welders-rods-and-plastic-...
I know I have spent more on other tools

▶ Reply

Permalink Reply by Homebuilt on March 9, 2009 at 10:49am

Yeah, my back-up plan is pop-rivets for strength and silicone to seal up the joints. It would just be much more elegant to weld the plastic. Harbor Freight has some fairly cheap ones, so I tho't some tweaker around here might have one. :-)