I rode today. Did you?

Nice first ride in the COLD.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Gene Tenner on January 11, 2012 at 12:32pm

▶ Reply

Permalink Reply by Tony Adams on January 11, 2012 at 12:43pm

42 miles today. Anyone recognize this place?

▶ Reply

Permalink Reply by Zoetrope on January 11, 2012 at 12:52pm

No. Do tell, though...

▶ Reply

Permalink Reply by S.Presley☠ on January 11, 2012 at 1:25pm

IPP

Find more videos like this on VloggerHeads

▶ Reply

Permalink Reply by Tony Adams on January 11, 2012 at 2:52pm

Correct! 41.878514,-87.868304

Also found a pretty decent coffeehouse not too far from the path in Elmhurst: http://www.elijahscoffee.com/

S.Presley said:

IPP

▶ Reply

Permalink Reply by Gerry G on January 11, 2012 at 3:31pm

I celebrate the tiny things, no glove on the A.M. commute. Thursday A.M. commute will be normal, P.M. commute S/B snormal.

Gene lovely pic South of Fullerton. Tony I couldn't place your shot, even though I've been out there plenty. Tell us about your well equipped bike though.

▶ Reply

Permalink Reply by Tony Adams on January 11, 2012 at 4:51pm

Tiny things are the best things to celebrate!

The shot was taken facing east in Bellwood (might be Maywood) a bit west of South 25th Ave.

You don't want to get me started on the bike. An 88 LeTour frame, a bunch of parts from another late 80's LeTour (cranks, seatpost, stem, fork, front brake), bars and grips from Working Bikes bins, the front wheel via the mighty Chainlink Marketplace (thanks Kelvin!). The only new parts in the original build was the rear wheel, which I built with a new Sturmey Archer 3 speed hub (w/ coaster brake). My first wheel build!

Before the tires (I originally had some used tires from the house parts bins) all the parts only added up to $250.

Subsequently I took advantage of Blue City's Free Installation special in uh, november or whenever that was and had them install the rear rack and Soma Fab fenders. I hate installing fenders so the special was too good to pass up. The fenders are the only things that have broken so far. I don't recommend them - although they are certainly pretty!

Currently she is sporting Panasonic RIBMO 700x32s. So far so good, no flats yet, but I only have a few hundred miles on them, so it is early yet. They handle well on everything except they got a bit lost in some wet/muddy crushed limestone along the York Road section of the Salt Creek Greenway today. Navigating the more firmly packed stuff on the IPP was fine though.

The idea was to make a relatively lightweight, low maintenance steel town bike for year-round daily riding. I was pleasantly surprised by how fast it is. I'm in the midst of tarting it up a bit now - I got a cheap red saddle on eBay and Blue City is getting some red translucent BMX peddles for me.

I love the bike, but I'm already thinking about my next build - a two speed based on an 80's steel MTB/hybrid frame if I can find one large enough - something with longer chainstays and cantilever brakes. (This is my Craigslist search, other suggestions are welcome: sierra | cimarron | crosscut | iguana | frontier.)

Steel Driver said:

I celebrate the tiny things, no glove on the A.M. commute. Thursday A.M. commute will be normal, P.M. commute S/B snormal.

Gene lovely pic South of Fullerton. Tony I couldn't place your shot, even though I've been out there plenty. Tell us about your well equipped bike though.

▶ Reply

Permalink Reply by Gerry G on January 11, 2012 at 5:17pm

Tony thanks for running down the particulars! I'm a vintage affectionado myself. Driving a '72 Schwinn Super Sport daily. Nice you do your own wrenching too. I understand tailoring the drive train to meet your needs. For weeks I've been putting off dropping one of the front chainrings. Having a six speed with the gear inches matched to my needs will be ideal. I do believe you've inspired me. Less is more as long as it's a good fit for it's intended purpose. Thanks!