WTB- Rear 26" wheel with 6 bolt disc hub

I am in need of a 26" rear wheel to be used for a fixed gear commuter.  Rear spacing is 135.  They are near impossible to find unless I do a custom build.  Let me know if you have anything.

Views: 209

▶ Reply to This

Replies to This Discussion

Permalink Reply by Doug Haynes on August 13, 2013 at 12:18pm

Wheel build time.

Permalink Reply by Dave Grossman on August 13, 2013 at 12:54pm
You are probably right. Finding the time is another story.
Permalink Reply by John C. Wilson on August 13, 2013 at 3:05pm

Getting all the pieces together takes more time than the actual building. First wheel build following the instructions of some author whose thought processes are not yours takes perhaps two hours. Or makes you crazy if you're just not a wheelbuilder. Or happens in 30 minutes if you have a little talent. When you think you've got it laced right you could ride it over to my wheelstand in Evanston for final tension/dish/true. Another 30 minutes plus travel.

Permalink Reply by Dave Grossman on August 18, 2013 at 1:24pm

If anyone has a 26" wheel with a 6 bolt disc hub I would be interested in that also.  I recently read about the option of the bolt on fixed cog.  The only spare wheels I have laying around are centerlock and I don't feel like spending 40 bucks on a conversion kit when I can maybe just get another wheel.  Let me know if you have anything.

Permalink Reply by Dirke on October 10, 2013 at 9:39am

Still looking?

I have one.  Brand new, never mounted, built by Marcus at Yojimbos.  It's a WTB speed disc rim, Formula hub, I think cartridge bearings, but I've never looked.  Story is....

I got hit by a car near work and the driver's insurance agent sent out an adjuster who went to the nearest shop to get an estimate, which happened to be Yojimbo's.  As you rightly noted, he didn't have a pre-built one so got the estimate for a like-kind replacement for my Bianchi MUSS.  It wasn't cheap, $225.  But they cut the check and I had Marcus build it for his troubles and have kept it around for a few years to be used when the OE wheel finally fails, which it has yet to do.  I trued up the OE wheel and it's not perfect but rolls sufficiently for my winter bike.

I'm thinking of trying to sell the MUSS and have been debating about which wheel to put on it.  I won't ask to get what it cost, but I'm not going to just give it away.  Again, if  you're interested, send me a friend request and we can take it from there.   Thanks and good luck.

If you're interested, let me know and I can send you pictures or you can come take a look, I'm in Ravenswood.



Dave Grossman said:

If anyone has a 26" wheel with a 6 bolt disc hub I would be interested in that also.  I recently read about the option of the bolt on fixed cog.  The only spare wheels I have laying around are centerlock and I don't feel like spending 40 bucks on a conversion kit when I can maybe just get another wheel.  Let me know if you have anything.

Permalink Reply by Dave Grossman on October 10, 2013 at 10:58am

Sent you a PM.  

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service