Trying to re-assemble an old bike w/a minimum of new parts, if you have one of these lying around in your parts drawer that you're will to part w/cheap, let me know.

Views: 37

Reply to This

Replies to This Discussion

If you're willing to go 5mm shorter, I have some 105s that can use a good home!
I've also got some 170mm cranks you can have, both sides of an AeroX single speed set with a 40 tooth ring and a Shimano Acera mtb set.
shoot me an email on the Acera set: MARQONE@excite.com

It's for an old mtn. bike that I want to put back together just to sell.

El Gecko said:
I've also got some 170mm cranks you can have, both sides of an AeroX single speed set with a 40 tooth ring and a Shimano Acera mtb set.
Actually, I looked at them again and they're Shimano Tourney mtb cranks, 170mm 42/34/24 tooth with non-removable rings. lmk if you still want them.
Sure, that would work. Send me an email if you want: MARQONE@excite.com
Thanks

El Gecko said:
Actually, I looked at them again and they're Shimano Tourney mtb cranks, 170mm 42/34/24 tooth with non-removable rings. lmk if you still want them.

RSS

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service