Salsa Woodchipper bar used two days $25

I've got a Salsa Woodchipper mountain bike drop bar for sale. I installed it on my touring/commuter bike and I just don't like it. Unfortunately, the stem clamp scuffed the paint on the bar ever so slightly so I can't send it back to where I bought it. So, these sell for about $32 - $40 depending on who you buy it from plus shipping. So, I'm selling it for $25 and you don't have to pay any shipping or tax. The width is 46cm and the clamp diameter is 25.4mm.

Views: 2937

▶ Reply to This

Replies to This Discussion

Permalink Reply by mark stetson on March 9, 2012 at 7:55pm

What's the OD on the straight part of the drops?

Permalink Reply by Far'arned Retrogrumpalunkus #63 on March 10, 2012 at 2:58am

Those are interesting bars -never seen them before.  I can see why someone wouldn't like them.  I'm not sure how they would be good for anything other than maybe lever compatibility with MTB levers and shifters.  What is the reasoning behind the very tight bend?  Mark's question about the OD is very salient. Would one put MTB levers below the bend on the drops?  Then what -interupters on the top?

Permalink Reply by David P. on March 10, 2012 at 3:19am

James,

These are designed primarily as dirt drops. They take road levers, and are meant to be set up high, with the drops as your default position, positioned closer to where you would normally have the tops on road bars.

David

Permalink Reply by Far'arned Retrogrumpalunkus #63 on March 10, 2012 at 3:32am

This is very interesting.  I'm reading the product description now.  

I can see where it would be an advantage for climbing and pulling back at the drops.   It is neat how drop bars are really coming back in strange ways.  Maybe that is because I'm getting interested in cyclocross that I'm seeing it more.

These are a really good bargain for someone who they would be right for.  I'm sure someone will snap up this deal. 

Permalink Reply by Far'arned Retrogrumpalunkus #63 on March 12, 2012 at 1:52pm

I can see where having wide bars would be a drag hauling a bike in and out of doors as well as up and down stairs.  It might be limiting in some traffic situations for some more aggressive riders who like to jump into tight spots between cars.  This is why I ended up going from MTB bars to Northroads on my daily tank.  Huge improvement.

As for nobody biting on them yet -it's still pretty early in the "spring" season.  Prices are still pretty low and the common bike folk are still hibernating.  I've yet to even try selling any of my restored bikes yet as the interest isn't quite there to push the supply/demand curve.  Give it a few more weeks and by the end of April stuff like this will be flying out the door.

I think it's a great deal  myself but I'm not in the market for something like this.  If I were I'd have snatched it up already. 

Permalink Reply by Far'arned Retrogrumpalunkus #63 on March 12, 2012 at 2:55pm

I'm not sure I want to live in a world were '94 is "old."

It's not even Classic or Vintage yet.  Yup, I'm a retrogrouch!

Permalink Reply by Kevin Mulcky on March 12, 2012 at 3:09pm

Try selling them on CAMBR.

Permalink Reply by Far'arned Retrogrumpalunkus #63 on March 24, 2012 at 4:36pm

I'll give you $20 for the bars if nobody else bites at $25.

Permalink Reply by Lucas! on June 22, 2012 at 12:22pm

Did you end up selling them?

Permalink Reply by Bryan McClaran on June 22, 2012 at 7:27pm
Hate to say it, but I think you're stuck with them. Also, we should get together and ride again soon. Maybe head down to Three Floyds or up to Kenosha.
Permalink Reply by grndskpr on June 23, 2012 at 3:37am

If you ship them, i will take them

OR

I will be downtown today from noon till ???

can meet up, however i realize this very late notice

thanks

Permalink Reply by Zach on August 8, 2012 at 6:36pm

Hey I'd be interested in these if you still have them for sale. Send me a message with place and time to meet.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service