low rider rack- some questions

I was trying to do a search, because I recall a discussion from a while back, but couldn't find it.

I am looking to get a front rack. This will go on a mtn touring rig that I have now, and a 700c touring bike, when I am able to get one.

I don't have lowrider mounts on my forks. So while not optimal (in my opinion) I will probably be using p clamps.

I was looking at the Axiom front low rider racks, and they seem decent.With those racks, do you have to use the Axiom front panniers, or are there other options?

Are there any other low rider racks that I should be looking at?

Thanks in advance,

RB

Views: 1020

▶ Reply to This

Replies to This Discussion

Permalink Reply by Casey Carnes on June 18, 2013 at 3:45am

The Nitto Campee Rack is pricey, but comes with many different mounting parts for different bikes.  If you are running v-brakes or cantilevers on both bikes, it would be a good solution, but not easy to move between bikes.

 

This axiom rack looks good too and looks like it includes everything to mount to your bike, so long as you have a steel fork.  http://www.treefortbikes.com/product/333222362814/448/Axiom-Journey... 

 

Another solution is using item #4 from here if they will fit on your forks. http://www.thetouringstore.com/TUBUS/Fit%20Solutions/FIT%20SOLUTION... 

 

Tubus racks are sweet and last forever, but also pricey.  Any smaller sized bags should fit on any rack, but its best to get the rack mounted and take measurements to be sure, if the rack rail is a different size a little tape or plastic tubing can make up the difference.

Permalink Reply by rb on June 18, 2013 at 4:06am

thanks for the feedback.

Cameron- great point about the ride height of a low rider rack.

I am not a small person, and I feel that I already have enough mass over the rear wheel, so that is the main interest in moving some cargo up front.

Permalink Reply by Tricolor on June 18, 2013 at 5:36am

I bought a Tubus Ergo for around $110 shipped from Amazon earlier this year.  I wanted something that went over the wheel to provide some extra rigidity.  It worked well, and when the front fork, frame, and wheel were destroyed the rack only had a tab bent.  I'd think more about the bags you plan to use if you're worried about scraping the ground, and bite the bullet when it comes to the rack's price.

Permalink Reply by Kevin Mulcky on June 18, 2013 at 8:09am

Look for racks that connect above the front wheel; either with a hoop or a flat top. These racks will be more rigid by design, which is especially important if you're using p-clamps.

If your mountain bike has front suspension, or if you plan on riding rough terrain, you'll want to limit your weight on the front wheel to avoid washing out and help you get over obstacles.

I can also recommend the lowrider racks made by Bruce Gordon. They're steel, work well with p-clamps, and are made in the usa.

Permalink Reply by rb on June 18, 2013 at 8:22am

thanks Kelvin,

The bikes that I'm using are mid 80s rigid mtn bikes. My miyata in particular is pretty much a touring machine from the factory, albeit with 26" wheels.

Thanks for the Bruce Gordon link. He looks to build some excellent quality gear. When I get a real touring rig, I will consider some of the BG stuff.

Permalink Reply by Sue Clark on June 18, 2013 at 9:00am
I've got these: http://salsacycles.com/components/down_under_rack

They don't have the over-the-top bit for rigidity. I do have a touring bike, so I'm not sure how they'd work on a fork that's not drilled for front racks. They do just fine w/the Ortleib front rollers.
Permalink Reply by Apie (11) on June 18, 2013 at 9:09am

On my long list of wants:

http://www.passstow.com/psgallery0.html

Nice porteur rack with low riding front panniers (not my bike)

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service