Looking for an ace mechanic who'll rebuild my '99 Manitou SX Ti forks.

My forks finally sprung a leak after 13 years of great service.  I'd like to find a shop/mechanic who can rebuild/overhaul this dinosaur of suspension forks and who has or can easily get the parts it might need in the process.  

Any recommendations?  Johnny Sprockets on Bryn Mawr?  REI?  who's your favorite Service department? 

thanks!

Views: 1163

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bailey Gene Newbrey on December 7, 2012 at 7:46pm

The problem isn't finding the mechanic, but rather the parts. All this new and ever-changing technology simply isn't supported. If an overhaul is what you need it's certainly possible, however, if any parts are required I'd imagine you are S.O.L. The same goes for most any IGH or hydraulic disc brake parts more than two or three years old. The industry has no interest in continued support for these. Hell, you can't even get some recent proprieitary Shimano spokes. I wouldn't say "planned" obsolesence, but rather obsolesence due to disregard for anything other than the most current.

Permalink Reply by Lawrence M. Lee on December 8, 2012 at 2:31am

Here is a link to a vintage suspension rebuilder.  The rebuild manual for you fork is listed on the lower right.  You could talk to a local shop about getting parts and trying the rebuild or do it yourself.  If need be box up the fork and send it to these guys.  Hope that helps.

 

http://www.suspensionforkparts.net/manitou_manual.php

 

Larry Lee

Executive Director Marketing

Chicago Area Mountain Bikers(CAMBr.org)

 

 

 

Permalink Reply by David S. Kato on December 8, 2012 at 5:22am

Thanks, Bailey.  The lack of parts availability is exactly what I was afraid of.  I'll try my luck and hope that I don't need any parts.  Actually, I think I just blew out the seals when I injected grease into it, but who knows?  I just thought I'd get it overhauled since it was being opened up anyway.  

Your response is much appreciated.

Thanks, Lawrence.  I'd like to get it done locally if at all possible.  In the past ('85-'93 and to '98 to '02) I was a bike mechanic but haven't overhauled hydraulic forks.  I don't think I want to start learning now, although I've seen the manuals and explod-o-matic drawings before.  I'll definitely keep your reco in mind if it gets that far.

Permalink Reply by Julie Aberman (Hochstadter) on December 10, 2012 at 5:07am

Romey Goldstein said See marcus at yojibos garage for all bike matters (via fb)

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service