I am taking an art class which requires me to lug a 24" x 30" portfolio, it has a shoulder strap but I'm foreseeing it flapping in the breeze uncontrollably. Any ideas on how to avoid this dilemma?

Views: 2372

Reply to This

Replies to This Discussion

A few strategically placed inner tubes should provide you with the stabilization you need.
maybe you could do something with a rack, and aattaching it to the side?
Unfortunately, the best way is probably more than you want to get into... The only way to not have it be a sail in the wind is to lay it flat---preferably low to the ground. That means a trailer.

While cargo trailers are generally a few $$'s, you might modify one of the used kid models. For example: http://chicago.craigslist.org/wcl/bik/1548548572.html A bunch of bungee cords and you're good to go for $60.
hire a messenger.
they make these surf board carriers for your bike.

http://www.cactusoutdoors.com/store/product/18551/Electra-Rack-Carv...
Here's something that's pretty easy, just extend a rack!

I tried this with some scrap steel, zip ties, a bungee and a couple of old tubes and it worked pretty well. If I was to do it more permanently I would probably use stainless hose clamps and refine a few things. But this mock up worked and I would use it for a one time carry.

Sorry the photos are so blurry but it should give you the idea. I used a wheel box (approx 31"x31'x8") that is close to your portifolio size.





Some other considerations and refinements I would do would be for heel clearance (pretty tight in this set up) and the level the portfolio sits to the ground (in this set up I'm sure it would catch on speed bumps and curbs). I think these issues could be easily addressed with a little time and effort. I put this set up together in 20 minutes. It also costs less than $10 and is made from reused materials. No need to spend money to solve problems when you use yer noggin! C'mon now, give it the ol' college try!
Be careful leaning into a left-hand turn there, Bikefreeek! :)
Clever solution. I've considering trying something similar with x-c skis and poles.

Bikefreeek said:
Here's something that's pretty easy, just extend a rack!

I tried this with some scrap steel, zip ties, a bungee and a couple of old tubes and it worked pretty well. If I was to do it more permanently I would probably use stainless hose clamps and refine a few things. But this mock up worked and I would use it for a one time carry.

Sorry the photos are so blurry but it should give you the idea. I used a wheel box (approx 31"x31'x8") that is close to your portifolio size.





Some other considerations and refinements I would do would be for heel clearance (pretty tight in this set up) and the level the portfolio sits to the ground (in this set up I'm sure it would catch on speed bumps and curbs). I think these issues could be easily addressed with a little time and effort. I put this set up together in 20 minutes. It also costs less than $10 and is made from reused materials. No need to spend money to solve problems when you use yer noggin! C'mon now, give it the ol' college try!
I like the looks of Bikefreeek's rack solution. Personally, after trying to wear a shoulder-strapped portfolio a couple of times, even with bungees and duct tape to hold it in place, I just switched to a plastic art tube strapped to my rack. A possibility if you can roll up your supplies.
Erik Swedlund said:
I just switched to a plastic art tube strapped to my rack. A possibility if you can roll up your supplies.

Now that's thinking!
you can't always roll art up though, bike freek's idea is great i think

RSS

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service