Custom Built Trailer For $$$

Who in this fine city builds quality steel trailers based on custom orders? Are they fast?

 

Here is my rough sketch of what the trailer will have to have...

 

Views: 440

▶ Reply to This

Replies to This Discussion

Permalink Reply by ad on May 10, 2011 at 6:35am
MSRP is more around over $500 to 600 depending on size.  I have to admit a lack of personal knowledge regarding costs on custom trailers.  Considering the costs of custom porter racks and other custom bike parts/racks in general, I assumed Surly's price would be under what a custom set-up would cost (Surly's price on just about everything else they produce has been more than fair given their reputation for durability/quality).  If independent builders are doing this type of 4130-steel trailer custom for under $500, good on them.  Just thought I'd share that Surly is doing something off the shelf that is pretty damn close to what is outlined above.
Permalink Reply by knowbody on May 10, 2011 at 6:51am

two other (three wheeled) possibilities:

  1. trike (delta configuration)
  2. chariot side hack

there are designs for both of these options to allow the bicycle to lean into the turn as opposed to the trapped in a triangle feeling that most trikes provide.

 

btw: noticed something about your depiction of the trailer above. you have an angular measurement for the length of part of the trailer 41 51/64" (corner to corner) as opposed a straight measurement just along one side. just wondering if this is that what you intended.

Permalink Reply by Spencer "Thunderball" Thayer! on May 10, 2011 at 7:35am
Yeah the Surly trailer is around $550 (with shipping). This is probably more expensive that the cost of a custom made one. http://www.treefortbikes.com/product/333222368061/450/Surly-Bill-Lo...
Permalink Reply by Liz on May 10, 2011 at 7:40am

http://www.wicycle.com/cargo_diy_kit_bicycle_trailer.php

 

Wike sells a DIY trailer kit, where the connections are included, but you go to home depot and ask them to cut the tube steel and platform to the dimmensions you desire.

 

its $129 for the kit and doesn't involve welding.

Permalink Reply by Far'arned Retrogrumpalunkus #63 on May 10, 2011 at 10:23am
$600?  Surly you jest...
Permalink Reply by Far'arned Retrogrumpalunkus #63 on May 10, 2011 at 10:27am
That's a pretty neat kit.  

Liz said:

http://www.wicycle.com/cargo_diy_kit_bicycle_trailer.php

 

Wike sells a DIY trailer kit, where the connections are included, but you go to home depot and ask them to cut the tube steel and platform to the dimmensions you desire.

 

its $129 for the kit and doesn't involve welding.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service