Steel rear triangle mounting kickstand hunt

Looking for manufacturer of steel rear triangle mounting kickstand. Anyone know who makes these? I talked to greenfield on the phone and it isn't theirs. Mounts the same way though. Who still makes these out of steel?

Views: 578

▶ Reply to This

Replies to This Discussion

Permalink Reply by Doug Haynes on October 31, 2014 at 6:42am

No one.

Permalink Reply by Lee Roy on October 31, 2014 at 7:43am

rear axle kickstand are not really that stable on adult bikes.

there is a Wald brand one for 16" & 20" bikes.

Permalink Reply by Lee Roy on October 31, 2014 at 9:22am

OMG, please stop, hahaha... your just messing with the CL people, right?

BikeBerry, I would not trust anything from them, nothing. 

Look up comments here on http://motorbicycling.com/

For all your motorized bike needs please visit Duane at http://thatsdax.com/index.html

He is super cool, and will either answer your call or call you back.

I will stop now as not to irritate anti-motorized bike folks.

Please visit your Local Friendly Bike Shop for advise on a rear mount kickstand.

Okay, why do you need a rear axle kickstand?

I would recommend a double leg bottom bracket mount one over this one from BB.

The last time I seen one of these was on a Bike Ambulance in Palatine.

I have not seen them on many motorized bikes. 

Permalink Reply by Joseph Prosnitz on October 31, 2014 at 1:41pm

I was looking for this but made of steel.  http://www.greenfieldny.com/chart_bicycle.htm#stabilizer

Permalink Reply by Legacy Frameworks on November 1, 2014 at 3:38am

It looks like Sunlite's version of the rear kickstand is made of steel. 

http://www.bikewagon.com/sunlite-kickstand-steel-mtb-rear-black 

Shops should be able to get this as well. 

Permalink Reply by Joseph Prosnitz on November 3, 2014 at 6:08am

Thanks legacy that looks like it might work

Permalink Reply by Jaik S. on November 3, 2014 at 8:18am

I've got a two leg kickstand from Pletscher on my LHT. Worth it if you ask me. I still haven't found a reliable source of decent rubber feet for the ends... but dang, that kickstand really holds up.

http://www.amazon.com/Pletscher-Two-Leg-Kickstand-320mm-Black/dp/B0...

Permalink Reply by Lee Roy on November 3, 2014 at 9:22am

This is the one I am thinking of. Very stable, folds neatly underneath.

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service