Repairing a dented head tube?

I recently picked up an older frame to build up, and the very top of the head tube is subtly dented. Appears fine with the naked eye, but it's enough so that a headset won't fit.

I roughly measured the inner diameter and it seems to vary by about 1.5mm

1" headtube, going to be a threaded headset

How do I fix it,

or should I have a shop fix it?

Views: 490

▶ Reply to This

Replies to This Discussion

Permalink Reply by Doug Haynes on March 30, 2013 at 1:30pm

I would have to see it to really let you know; it's kind of a subtle thing.

Is it to small or to large to fit the headset cups?

The tricky part is the metal will be stretched and may have to be shrunk after reshaping to get a good fit.  Or it can be peened after resahping.  If you want to arrange to meet for me to look at it send me a message.

Permalink Reply by wigwam on March 30, 2013 at 2:42pm

I'll probably end up taking it to boulevard bikes. The bottom bracket needs to be faced etc so I might as well get it all taken care of at once

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service