French bikes, Bottom Bracket issue.

My neighbor wants me to turn his girlfriends '71 Peugeot into a single speed. I have never worked on french bikes before and was wondering what it is I need to adapt the bottom bracket to a standard size so I can replace the crankset.

Is there a standard kit I can buy that will adapt from french threading and if so what is a good one?

▶ Reply to This

Replies to This Discussion

Permalink Reply by Michael Perz on July 21, 2011 at 8:19am

I'm not use what you mean by "kit" exactly, but here's a French-threaded bottom bracket with a JIS spindle:

http://store.velo-orange.com/index.php/components/bottom-brackets/g...

You'll just need to determine the appropriate width based on which particular cranks you plan to use.

▶ Reply

Permalink Reply by SlyRed on July 21, 2011 at 8:26am

Velo Orange sells French thread sealed bottom brackets. If it is running smooth there is no need to replace it. You might want to repack it with grease, or even replace the ball bearings. The more serious question is whether the rear hub has English or French threads for the freewheel.

▶ Reply

Permalink Reply by Ryan L on July 21, 2011 at 10:32am

Thanks!

The bb is actually fine but the crank chainrings need to be replaced and the crankset is cottered, so finding a replacement might be difficult; I wish I lived closer to West Town Bikes. I have a replacement I can use but I would need a square tapered bb instead of the current cottered version, hence a new bb that will properly fit. I will probably just order the one off Velo-Orange once I figure out the spindle length.