Campy CX10 Crankset Compatibility

I am looking to build a new touring/singletrack/commuter using a Surly Ogre framset. I have a set of Campy CX10 cranks and chainrings and Campy BB that I would like to install on the Ogre. They are too nice to be used in a single speed set up as they currently are.

Anyone know what component group would be compatible with the CX10 set? What brand of levers and groupset would work best? I have some Shimano Deore/Tiagra stuff laying around and would turn the bike into a 2x9. However, I have no idea if they will work with Campy stuff. I figure if I gather enough info I can buy some stuff at the swap on Saturday.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bailey Gene Newbrey on March 3, 2013 at 11:11am

It's made to work with any Campy 10 speed stuff. Campagnolo stuff is pretty darn proprietary. Also, you're gonna need a 73mm bottom bracket on the Ogre and this crank is made for a 68mm.

▶ Reply

Permalink Reply by william on March 4, 2013 at 2:59pm

you can use those cranks with 9 speed shimano. no problem there.

not sure about using powertorque w/ a mtn bb shell, though. look into that.

▶ Reply

Permalink Reply by Dave Grossman on March 4, 2013 at 3:17pm

Yeah I realized the issue with bottom bracket after I posted. Doh! I will keep it as a single speed on my Cross Check for now. Finding 135 BCD chainrings is tough!