The Chainlink

I commute from Edgewater to downtown on the FLT.  Very sandy.  Regular chain grease has a tendency to get emulsified w/ rain & water, then sand sticks in that emulsion and makes for an abrasive, grinding ride.  I end up degreasing & re-lubing all the time.

What's everyone's experience/opinion on the best lube for those conditions?  I'm thinking something dry, or on the dry-side, so it isn't such a sand magnet.  Any specific recommendations would be appreciated.

Views: 1035

Reply to This

Replies to This Discussion

Finish Line has several "dry" teflon based lubricants that I use during the summer months.  (I commute on the LFT daily, year round.)  It actually seems to work quite well.  You have to re-apply it somewhat frequently (every week or so), but I don't have issues with stuff collecting on my chain. 

I switch to a wet lube for the winter season, however.

Cool, I'll check those out.  I bought some graphite powder yesterday, that's as dry as it gets, but have a feeling one rain will wash it all off.

Finish line dry lube works great for keeping dust and grime off the chain. It does need to be applied pretty regularly though to keep all running well.



Joe Studer said:

Finish Line has several "dry" teflon based lubricants that I use during the summer months.  (I commute on the LFT daily, year round.)  It actually seems to work quite well.  You have to re-apply it somewhat frequently (every week or so), but I don't have issues with stuff collecting on my chain. 

I switch to a wet lube for the winter season, however.

Anyone of the dry lubes on the market will work better.

I know it is language nit picking but grease is never used on a chain, oil or lube is.  There is a huge difference between them.

I also live in Edgewater and ride the LFT every day.  I use Finish Line Dry Lube in the summer and Wet in the winter.  Also, I wipe the chain off every couple of days and lube about every week and a half.

True true. Grease is more for bottom-brackets, bearings, etc, right?  Consistency of petroleum jelly.

notoriousDUG said:

Anyone of the dry lubes on the market will work better.

I know it is language nit picking but grease is never used on a chain, oil or lube is.  There is a huge difference between them.

Yep.

Kevin Kelly said:

True true. Grease is more for bottom-brackets, bearings, etc, right?  Consistency of petroleum jelly.

notoriousDUG said:

Anyone of the dry lubes on the market will work better.

I know it is language nit picking but grease is never used on a chain, oil or lube is.  There is a huge difference between them.

I've found Chain-L to be pretty effective.  Once you apply it, it's pretty dry and since you wipe it off from the side plates after the first or second day, it doesn't really accumulate much crud over time.  It lasts for a really long time too.

Kevin, I ride the lakefront path 52 weeks per year and have used all kinds of petroleum-based products. Some will not work in the winter and others collect too much sand and gunk. Based on an earlier post recommendation on Chainlink I tried the White Lightning line of wax-based products. My recumbent trike uses 3 lengths of chain, so this is an important issue for me. I lubed on Saturday, the first time since May.  My chain is almost always clean.

However, I also discovered something else. To protect myself from getting chain on my calf, I put a piece of pipe insulation on the bike that covers the chain. To my surprise, the gentle flapping of the insulation also seems to knock off clingy particles, too. Go figure.

+1 on Chain-L,,,I commute on the very dry, dusty limestone of the IPP and GWT and drivetrain stays pretty clean!

S said:

I've found Chain-L to be pretty effective.  Once you apply it, it's pretty dry and since you wipe it off from the side plates after the first or second day, it doesn't really accumulate much crud over time.  It lasts for a really long time too.

Just go real easy until you get to know Chain-L. It is thick, and can be easily to overdone. You will have to wipe your chain for a day or two, but worth it. If you overdue it, forget about it.

Rick Schukat said:

+1 on Chain-L,,,I commute on the very dry, dusty limestone of the IPP and GWT and drivetrain stays pretty clean!

S said:

I've found Chain-L to be pretty effective.  Once you apply it, it's pretty dry and since you wipe it off from the side plates after the first or second day, it doesn't really accumulate much crud over time.  It lasts for a really long time too.

LET ME START THIS BY INTRODUCING MY SELF AS DOCTOR SPROCKET 

I HAVE OVER 30 YEARS EXPERIENCE IN THE CYCLING FEILD HILL & MUD HA HA HA 

BUTT NOW ON TO A MORE SERIOUS LINK IN YOUR ARMOR ON THE ROAD.

I USE & RECOMMEND YELO-VELO PLANT BASE LUBRICANT.

IN WINTER MONTHS USE THE NASTY WET & IN SUMMER & SPRING 

MILKY WHITE WITH CERAMIC PARTICLES. THIS IS FARLEY NEW IN THE INDUSTRY. 

I HAVE BEEN USING IT FOR OVER A YEAR NOW & HAVE DUMPED ALL OTHER BRANDS.

I CAN GO 500 MILES BETWEEN LUBES IN THE SUMMER MONTHS. THERE PRODUCT IS CURRENTLY IN

USE  BY ONE OF THE PRO TEAMS AT THE TOUR DE FRANCE PROMOTED BY KENDA TIRE & 5HOUR

ENERGY. I USED THERE PRODUCTS LAST YEAR AT LEVI LEIPHEIMER'S GRAN FONDO WITH OVER 7,500

RIDERS CMING THROUGH MY REST STOP & RE-LUBED OVER 600 CHAINS & CABLES + DERAILLEURS

NO OTHER PRODUCT CAN GIVE THE PERFORMANCE & DURABILITY THAT YELO VELO HAS, BESIDS BEING

A GREEN PRODUCT http://www.yelovelo.com/

yvmedline.jpg

YOU CAN ORDER DIRECT FROM MARK LOWENSTERN.

HE WILL BE  INTRODUCING MY INVENTION THE TIRE BOOT AT INTER-BIKE THIS YEAR

THIS IS A 250 THREAD COUNT HI TENSILE STRENGTH NYLON IN A VINYL BLEND ABLE TO WITH STAND

150 PSI  

RSS

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service