Kinda Funny!
Not Nathan Fillion (aka Paul) said:"Ah- sir, your bike is under the bus"
The bungee cord is a great idea and it would have probably kept this from happening. I will probably use a bungee cord from now on. Fool me once, shame on you mr. CTA man!
To clarify, the spring worked and it held (with the usual amount of tension) properly when I put the retainer arm over my tire. It seemed to fail at some point after the bus started moving. While waiting for the supervisor to show up I extended and contracted the retainer arm on the rack and there was no tension in either direction so it felt like what ever spring that was working before was no longer working or missing all together.
There wasn’t any damage to the bike to claim against the CTA, other than some scratches on the fork that were on top of previous scratches, and handle bar tape. The handle bar tape was an old inner tube. So, because of that there isnt anything for the CTA to follow up on with me and visa versa.
The lock idea sounds good too. I'm always nervous someone's going to snatch it off the front of the bus while it's sitting at a light. If there was a lock holding the arm onto the bike it may not have happened.
Is there anyone who has had to put in a claim against the CTA for a bike related (or any other) issue? It seems like it would be a bureaucratic nightmare.
bus ok?
I actually did use a bungee on Friday when I encountered a rack that had a worn out spring (the style they're phasing out with the red tire retainers)-- I asked the driver if it was OK and he was very nice.
All it takes is a short bungee between the wheel retainer and any part of the bike (I used the bottle cage).
As to the OP's problem-- the new style racks that they're phasing in can get stiff-- typically that makes the wheel retainer a bear to extend (frikkin' hate it), but in Paul's case I'm guessing he extended it and it stuck in that position rather than retracting in on the wheel? I always give them a nudge and try to make sure they grab the wheel towards the back of the high point-- if it wants to stick in that position, fine.
The style you're referencing Clark . . . I think we only saw a few of those in the city that were early prototypes-- not sure exactly what you meant to link to but the wheel retainer is shaped like a cane handle, right?
Clark said:And I'd also like some suggestions for the rest of us who use those bus bike racks...how can we make sure this doesn't happen to us? The bus bike rack shown in your picture isn't like those that I've used, which are totally made of steel and have no springs as far as I know.
The pictured rack (above) looks a lot flimsier. I'd assume that front wheel stabilization bar and spring might fail in other instances. Could we keep the bike on the bus by using a bungie cord somehow? Perhaps to positively attach the clamp arm to the front wheel? What do you suggest? I don't like the option to ride my bike down the bus route, instead of using the bus.
Aside from the bus lamenting exasperations of inadequacy, it seemed fine when I left.
james wilson said:bus ok?
i heard once of a bike on the bus rack and rider onboard, bus stopped at stop, black guy run up yanked the bike rode off on it.
203 members
262 members
269 members
63 members
172 members