FS: 60cm Trek 412 Single Speed Conversion $400

1980 Trek 412 completely rebuilt. Headset repacked, all new parts.
Ishiwata Tubing
Frame is spaced at 126 but running 120mm spaced track wheels. Have run 130 as well for geared setup.
Clears a 700x40
Can be run geared or single speed with horizontal dropouts

Geometry
ST: 60cm
TT: 58 cm
HT: 190
HTA: 73
STA: 73
CS: 445
Wheelbase: 1055

Build:
Sun Ringle ME14a rims laced to Suzue Pro Max Track Hubs
Clement USH 700x35 tires
Tektro 559 Nutted Brakes
16T Acs Freehweel/16T Suntour Track Cog (Currently running freewheel)
Sugino XD2 Crank 46T Ring
Sram PC1 Chain
Tektro Levers
Nitto Noodle Bars 46cm
VO Dirt Drop Stem 90mm
Sakae Post
WTB Laser Saddle

Asking $400

▶ Reply to This

Replies to This Discussion

Permalink Reply by Tricolor on June 7, 2020 at 6:02am

That's a very nice conversion of an old frame. Hopefully it's already sold.

▶ Reply

Permalink Reply by Dave Grossman on June 7, 2020 at 7:24am

Thanks. I haven't had any interest at all. Apparently a $700 Trek hybrid is a hot commodity but not a nicely priced conversion. I'll probably just keep riding it.