Replies to This Discussion

Permalink Reply by Skip Montanaro 0mi on August 13, 2013 at 4:50am

Anything six-speed which accepts a freewheel will do the trick.  Can you describe "acting up"?  Maybe the hub just needs to be repacked or the freewheel replaced. I don't think I have many spares, but I'll check to see what I have in the way of rear wheels when I get home.

Is it an RRB?  I have one which is a bit older than that.

Skip

• ▶ Reply

Permalink Reply by Damir on August 13, 2013 at 5:18am

Thanks Skip - I am sorry I should have been more specific...I repacked this hub over the weekend and on my commute this morning I have noticed that it's no longer making the clicking/ratcheting noise when not pedalling.  There is also a slight delay before pedals are engaged when first start pedalling.  

I never removed the freewheel when I was working on repacking the hub since bearings were easily accessible so I am not sure why all of the sudden freewheel is not making that clicking noise.  I did spray a lot of degreaser on the freewheel in order to clean it so I am not sure if that's related.  

I don't know how serviceable these hubs are or what I need in in terms of tools in order to work on it.  This bike is very similar to the one you have in your pictures...it's Shimano 600 all around and Matrix wheels.  It does not have a decal on the downtube like yours has.  Instead it has a small round sticker on the seat tube with RRB Cycles label on it.  Steel is Champion 2.  I'll take some pictures in few minutes and will post them here. 

BTW...you would not happen to be Skip that worked in the Data Center in Evanston?  I have a nametag with your exact name in my office.

Thanks for your help.

• ▶ Reply

Permalink Reply by Skip Montanaro 0mi on August 13, 2013 at 5:31am

Damir said:

BTW...you would not happen to be Skip that worked in the Data Center in Evanston?  I have a nametag with your exact name in my office.

At Northwestern?  That would be me.  I still live in Evanston.

Freewheels I have.  You could bring your bike over to my place sometime.  I'd be happy to take a look at it and see if I have one that would work for you.

• ▶ Reply

Permalink Reply by Damir on August 13, 2013 at 5:38am

Yes at NU. This bike originally came from Dana.
I would not be able to stop by today (my kid has soccer after work) but I should be available tomorrow. I take this bike to work everyday. Let me know if tomorrow will work.


Skip Montanaro 12mi said:

Damir said:

BTW...you would not happen to be Skip that worked in the Data Center in Evanston?  I have a nametag with your exact name in my office.

At Northwestern?  That would be me.  I still live in Evanston.

Freewheels I have.  You could bring your bike over to my place sometime.  I'd be happy to take a look at it and see if I have one that would work for you.

• ▶ Reply

Permalink Reply by Skip Montanaro 0mi on August 13, 2013 at 5:49am

Damir said:

I would not be able to stop by today (my kid has soccer after work) but I should be available tomorrow. I take this bike to work everyday. Let me know if tomorrow will work.

I'll probably be home a bit late Wednesday, probably after 6pm.  Shoot me an email (skip at pobox.com) and I'll reply with my phone # so we can coordinate more easily.

S

• ▶ Reply