CHeap Rims

I was wondering if any one had some cheap rims that they are trying to get rid of. I made the mistake of putting to much air in the tire and it blew up and messed up the rim to much to the point where it is shot. So I was wondering if anyone had a cheap set of 700cc and the back axel being some were between 120mm to 124mm

▶ Reply to This

Replies to This Discussion

Permalink Reply by Far'arned Retrogrumpalunkus #63 on October 5, 2012 at 7:22am

You want wheels, not just rims. Rims are just the rim part without the spokes or hub (that's why they are called rims.)

120mm is a standard rear hub/dropout spacing, with the next standard size at 126mm.

▶ Reply

Permalink Reply by Bryan March on October 5, 2012 at 10:15am

Yes sorry my mistake I need wheels

▶ Reply

Permalink Reply by Vitaliy on October 5, 2012 at 9:00pm

I will be selling a Weinmann DP18 FRONT wheel after this weekend. I will include the whole entire wheel: rim, tire, inner tube. Im asking $50

▶ Reply

Permalink Reply by Vitaliy on October 5, 2012 at 9:17pm

Sorry I meant to press 8, so $80. We could negotiate if youd like.

▶ Reply

Permalink Reply by Doug Haynes on October 6, 2012 at 9:55am

The DP18 only tells you what rim it is; the hub that it is laced to has a significant impact on the value of the wheel.

Vitaliy said:

I will be selling a Weinmann DP18 FRONT wheel after this weekend. I will include the whole entire wheel: rim, tire, inner tube. Im asking $50

▶ Reply

Permalink Reply by Vitaliy on October 6, 2012 at 10:05am

Thank you for letting me know DUG! I didnt realize this. So the DP18 is laced to an origion8 propulsion hub. Let me know how that would change the price. I still think $50-80 is a fair deal

▶ Reply

Permalink Reply by TehDoak on October 7, 2012 at 9:32pm

I've got a set of Alex DA16 Wheels (unbranded sealed hubs) I'll let go for 80. No tires come with it, but I'll throw in a few old tubes (they are drilled for Schrader, so i can't use them)