So, I bought a bike this summer and really love it, except for one nagging detail - my left knee is in pain everytime after I bike.

So to backtrack a bit, I had biked earlier but it was on cruiser bikes, and now finally I upgraded to a road bike. Earlier this summer I had the fortune of falling and landing hard on my left knee and hitting it against rock steps while walking (yep, just walking).
Scroll down to 2 months later....When I first bought the bike I biked so much that I ended up with swollen and painful left knee. My dr said I was just getting overly enthusiastic, biking just aggravated the earlier injury, dx with patellofemoral inflammation and a little RICE will fix. So I did. Pain got better but not gone.

Then I fell off bike, not biked, knee pain disappeared completely during then (or I was hurting so much from bike injury that I did not notice left knee pain). This week I got back on my bike, and left knee pain started again. Now the swelling is entirely gone, but it's still a nagging persistent pain that feels a bit sore, coming from within the knee.

Question now is:
What's the next step? Should I:
1) Go back to bike shop and get fitted, seeing if bike fit is the problem (I've raised the bike seat since I bought it for better biking but alas that did not take care of pain. Also my right knee is perfectly happy)
2) Go back to dr, see what else is up his sleeve
3) Find a specialist who deals with this
4) ????

I am sure this must happen to lots of other folks. Please let me know if you have any suggestions or stories.
Much appreciated!

Thanks.

Views: 324

Reply to This

Replies to This Discussion

iggi,

you'll need some basic tools to compare the two bike's geometry: a level, a plumbob (string with weight on it); tape measure, and a friend (will make things easier). try to match the second bike's fit to the first. i start with cl of crank-to-seat (setback and direct distance), then cl of crank to bars (set your bar height) then check seat to bars - again sometimes a new stem is needed. crankarm length may be a problem. more likely for knees would be the distance between the pedals set by the crank (q-factor? some fancy word) since you are going to "easier" gearing, that is probably not the culprit.

iggi said:
i was actually going to start a thread about something similar to this...and maybe still should...in relativity to comfort and proper fitting...
There are a lot of different theories and perspectives on what creates a "good" fit on a bicycle. If you are going to try to get a better fit at home, though, I suggest reading this article by Peter White: http://www.peterwhitecycles.com/fitting.htm. I used it to tweak my bike before I brought it into a professional fitter. Using the article, I was able to get the bike to the point that a professional fitter really only had to change two things on my setup when I brought it in (she gave me a narrower bar and lowered my seat a tad so I wasn't overextending my leg, which I'm prone to do for some reason). Unfortunately for me, the knee pain didn't go away and I had to go to a sports doc. The fitting I did through the article and professional fitter did improve things, though; like how my wrists and back felt after a long ride.
Thanks guys for all these helpful feedback!

Regarding my bike pedal, it's toe clip with the adjustable straps. Haven't decided whether I want to change that as I usually don't like carrying extra pair of shoes..

So I think I will try to have the bike fitted once my knee is good enough for me to ride to the shop again. Which shops in the city are good with good folks? (this is important). Will also take a look at Athletico's complimentary screening program, as I just found out they have a location less than 10 min from my place!

Also, regarding one of the earlier comments, my doc told me to stay off for 1 or 2 weeks, and I stopped for 1 month, and had no knee problem even when playing ultimate, so I figured knee was healed. But it seems like I still need to work up my knee to the speed I like to pedal at, which is as fast as possible without running over small children.

Meanwhile it's back to the gym for those knee exercises...
If you are considering clip-in pedals and shoes, Bontrager has some really nice entry level MTB Race shoes that are great especially mixed with Crank Bros. eggbeaters. Complete outfit for about $150. The shoes have big enough tread that the cleats, which are recessed, don't touch the ground and wear quicker than normal and the shoes are really comfortable especially with the adjustable e-soles. I recently switched from the clips and straps, which I had been using for the last 5 years, and have been absolutely thrilled with the results. Clip in is intuitive and took about 10 minutes to acclimate to, and release is as easy as kicking your heel out 20 degrees. The power transfer is amazing and so much better than clips and straps, in fact no comparison. My legs are getting a better workout as is my butt, and the strain is way less on my knees.

Amy Y said:
Thanks guys for all these helpful feedback!
Regarding my bike pedal, it's toe clip with the adjustable straps. Haven't decided whether I want to change that as I usually don't like carrying extra pair of shoes.. So I think I will try to have the bike fitted once my knee is good enough for me to ride to the shop again. Which shops in the city are good with good folks? (this is important). Will also take a look at Athletico's complimentary screening program, as I just found out they have a location less than 10 min from my place!

Also, regarding one of the earlier comments, my doc told me to stay off for 1 or 2 weeks, and I stopped for 1 month, and had no knee problem even when playing ultimate, so I figured knee was healed. But it seems like I still need to work up my knee to the speed I like to pedal at, which is as fast as possible without running over small children.

Meanwhile it's back to the gym for those knee exercises...

RSS

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service